Imprimer à partir d’un iPad avec HP iPrint


this video explains how to print from an Apple iPad using HP’s I print software first connect your iPad to your local wireless network next make sure that your HP eprint printer is turned on and is connected to your local wireless network if you are unsure if your printer is connected to your local wireless network check by going to the printers control panel touch the button next to the setup icon in the lower left corner the setup menu displays touch the right arrow button to scroll through the options and select wireless then touch ok the wireless menu displays touch the right arrow button to scroll through the options and select wireless settings and then touch ok the wireless settings menu displays the right arrow button to scroll through the options and select print network configuration page then touch ok the printer prints the configuration page under the 802 911 wireless section on the configuration page the status should show as connected also the network name or SSID that is listed should be the network to which you want to be connected no Bluetooth or 3G connections are not supported AirPrint is compatible only via a nato 2.11 wireless network make sure your iPad is connected to the local wireless network by first going to the iPads home screen tap the Settings icon the settings window opens the left side tap Wi-Fi the wireless settings menu will open make sure the Wi-Fi button at the top of the right pane is switched to on to enable wireless next the choose a network section will populate with all detected networks in the area tap the name of your local wireless network enter in your WPA passphrase or WEP key then tap the join button once connected a checkmark will display next to the network name confirm that you are properly connected to return to the home screen tap the HPI print icon below the application tap photo albums or saved files to open the file you want to print edit the photo as desired once it is previewed on the screen note that your print quality might be poor if you enlarge the photo too much tap the right arrow button at the bottom of the application to bring up the settings menu tap the printer section and then select the printer that you want to print to change print options as desired then tap Done finally tap the print button prince2 the main tray if available your photos will automatically print from your printers dedicated photo paper tray

Leave a Reply

Your email address will not be published. Required fields are marked *